AWR MWO Libraries
To help streamline your design process, we offer an extensive collection of free design libraries. These libraries are available for Agilent ADS, AWR, and Eagleware, along with S-parameter data for many of our components.
Our MLC/MLI software generates s2p files compatible with your EM simulator. Additionally, through our collaboration with Modelithics Inc., we now provide scalable board substrate thickness and dielectric constant modeling for our capacitors and inductors.
Explore the design libraries below. Contact us for technical support.
Johanson_AWR.zip Johanson_AWR_Installation_Guide.pdfAWR MWO Libraries
How to Use AWR Microwave Office with Johanson Technology Components
1. Start AWR Microwave Office Software
2. Access XML Libraries:
- Go to "Elem" tab
- Double click on "XML Libraries"
- Double click on "AWR Web Site"
- Double clikc on "Parts by Vendor"
- Double click on "Johanson"
3. Select the Desired Component
- Double click on the type of component desired.
- Double click on the sub-series of that component type.
4. Add the Component to Your Schematic
- In the component window in the lower left-hand corner, locate the specific part desired.
- Drag this component over to the schematic window while holding down the left-hand mouse button during the entire process.
- Release the mouse button to see the outline of the component in the schematic window. It may take a few seconds for the part to appear.
- When the location of this component is as desired within the window, click the left mouse button again to place the component.
5. View the Specification Sheet
- Place the cursor over the component located in the component window in the lower left-hand corner.
- Click the right-hand mouse button and choose "Element Help."
- You will be led to a page on the Johanson Technology site where you can link to the individual specification sheets or the individual S-Parameter file.
6. View the S-Parameter File in MWO Software
- Click on the "Proj" tab.
- Double click on the specific part number located under the schematic name in the "Circuit Schematics" folder.
7. View the Layout Drawing
- Click on the "Layout" tab.
- Double click on the size or the part number root for the specific part shown in the list of layouts.
- Alternatively, double click on the component as it appears on the schematic window, then choose the "Layout" tab in the window that appears.
This guide provides the necessary steps to integrate Johanson Technology components into your AWR Microwave Office designs, ensuring a seamless workflow.