Tape & Reel Packaging

Chip Capacitor Tape & Reel Packaging

Capacitor Capacitor Tape & Reel Packaging PDF

Johanson capacitors are available taped per EIA standard 481. Tape options include 5", 7" and 13" diameter reels. Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MLCs. Quantity per reel ranges are listed in the tables below and are dependent on chip thickness.

TYPE/SIZE	REEL QUANTITY	TAPE TYPE	TAPE CODE	REEL QUANTITY	TAPE TYPE	TAPE CODE	REEL QUANTITY	TAPE TYPE	TAPE CODE
R03/01005	20,000	Paper	Y	30,000	Paper	T	N/A	N/A	N/A
R05/0201	500	Paper	Y	15,000	Paper	T	N/A	N/A	N/A
R07/0402	500	Paper	Y	10,000	Paper	T	N/A	N/A	N/A
R14/0603	500	Paper	Y	4,000	Paper	T	10,000	Paper	R
R15/0805	500	Embossed	Z	4,000	Embossed	E	10,000	Embossed	U
R15/0805 Vertical	500	Embossed	Q	3,000	Embossed	P	N/A	N/A	N/A
S42/1111	500	Embossed	Z	2,000	Embossed	E	10,000	Embossed	U
S42/1111 Vertical	500	Embossed	Q	1,000	Embossed	P	N/A	N/A	N/A
S48/2525	N/A			250	Embossed	E	1,000	Embossed	U
S58/3838	N/A			250	Embossed	E	1,000	Embossed	U
LASERtrim® (ALL)	500	Paper	Y	4.5-5.0K	Paper	T	15,000	Paper	R
SUBSTRATES - DEPENDS ON SIZE, TYPICAL IS 10/BOX   CAP ARRAYS-100/TRAY SINGLE LAYER CAPACITORS - UP TO 50 MIL, 400/WAFFLE PACK; >50 MIL, 100/WAFFLE PACK SLC'S CAN ALSO BE MOUNTED ON GRIP RINGS, RING FRAMES, AND SURFTAPE CUSTOM PACKAGING AND QUANTITIES ARE AVAILABLE, CONTACT THE FACTORY FOR OPTIONS PLEASE VISIT OUR WEBSITE FOR RF CERAMIC COMPONENTS PACKAGING INFORMATION.

Inductor Tape & Reel Packaging

Inductor Tape & Reel Packaging PDF

Type	A	A'	B	C	D	T
L-05B	2.0±0.05	4.0±0.1	0.38±0.02	0.68±0.02	2.0±0.05	Max.0.44
L-07C	2.0±0.1	4.0±0.1	0.6±0.1	1.1±0.1	2.0±0.1	Max.1.0
L-14C	4.0±0.1	4.0±0.1	1.0±0.1	1.8±0.1	2.0±0.1	Max.1.3

Reel Dimensions (Unit: mm)

Quantity

Type	L-05B	L-07C	L-14C
Quantity/reel	15,000 pcs	10,000 pcs	4,000 pcs
Tape material	Paper	Paper	Paper

Leader / Trailer Tape (Unit: mm)

Peel-off Force

Peel-off force should be in the range of 0.1 – 0.6 N at a peel-off speed of 300±10 mm/min.

Notes

The contents of this data sheet are subject to change without notice. Please confirm the specifications and delivery conditions when placing your order.

Wirewound Inductor Packaging Information

TYPE/SIZE	REEL QUANTITY	TAPE TYPE	TAPE CODE
L-07/0402	10,000	Paper	T
L-14/0603	3,000	Embossed	E
L-15/0805	2,000	Embossed	E

Dimensions (unit: m/m)

Type	A	B	F	K	T	W
L-07	0.70	1.20	2.00	-	0.70	8.00
L-14	1.25	1.80	4.00	1.10	0.20	8.00
L-15	1.42	2.26	4.00	1.30	0.20	8.00

RF Antenna Tape & Reel Packaging

RF Antenna Tape & Reel Packaging PDF

Reel Specifications

Dimensions (unit: m/m)

JTI Size Code	Size Metric	Reel Qty
AT07	1005	10,000
AT14	1608	4,000
AT18	3216	3,000
AT42	5020	2,000
AT43	7020	1,000
AT44	7635	1,000
AT45	9520	1,000
AT46	8516	1,000
AT47	R130	1,000

Tape Specifications

Size Code	Size Metric	A	A'	B	C	D	E	F	t	T
AT07	1005	2.0 ± 0.05	4.0 ± 0.1	0.62 ± 0.03	1.12 ± 0.03	2.0 ± 0.05	3.5 ± 0.05	8.0 ± 0.1	0.20 ± 0.05	1.0 Max.
AT14	1608	4.0 ± 0.1	4.0 ± 0.1	0.95 ± 0.1	1.80 ± 0.1	2.0 ± 0.1	3.5 ± 0.05	8.0 ± 0.1	0.20 ± 0.05	1.0 Max.
AT18	3216	4.0 ± 0.1	4.0 ± 0.1	1.90 ± 0.1	3.50 ± 0.1	2.0 ± 0.1	3.5 ± 0.05	8.0 ± 0.1	0.20 ± 0.05	1.40 Max.
AT42	5020	4.0 ± 0.1	4.0 ± 0.1	2.40 ± 0.1	5.50 ± 0.1	2.0 ± 0.1	5.5 ± 0.1	12.2 ± 0.2	0.20 ± 0.05	1.40 Max.
AT43	7020	4.0 ± 0.1	4.0 ± 0.1	2.40 ± 0.1	7.30 ± 0.1	2.0 ± 0.1	5.5 ± 0.1	12.2 ± 0.2	0.22 ± 0.05	1.55 Max.
AT44	7635	8.0 ± 0.1	4.0 ± 0.1	3.75 ± 0.1	7.85 ± 0.1	2.0 ± 0.1	7.5 ± 0.1	16 ± 0.2	0.30 ± 0.05	1.40 Max.
AT45	9520	4.0 ± 0.1	4.0 ± 0.1	2.30 ± 0.1	9.70 ± 0.1	2.0 ± 0.1	7.5 ± 0.1	16 ± 0.2	0.22 ± 0.05	1.45 Max.
AT46	8516	4.0 ± 0.1	4.0 ± 0.1	1.85 ± 0.1	8.70 ± 0.1	2.0 ± 0.1	7.5 ± 0.1	16 ± 0.2	0.25 ± 0.05	1.40 Max.
AT47	R130	8.0 ± 0.1	4.0 ± 0.1	3.35 ± 0.1	10.35 ± 0.1	2.0 ± 0.1	7.5 ± 0.1	16 ± 0.2	0.25 ± 0.05	1.40 Max.

Tape Peel Strength

Peel-off force should be in the range of 0.1 – 0.6 N at a peel--off speed of 300 ±10 mm/min.

Storage Conditions:

1. Temperature:15 to 35 °C,Relative Humidity (RH):45 to 75%.
2. Non-corrosive environment
3. Products should be used within six months of receipt.

IPC Tape & Reel packaging

IPC Tape & Reel packaging PDF

1. Taping Specifications

1. 1. Tape Dimensions (Units: mm)

JTI Size Code	Size EIA	Size Metric	A	A'	B	C	D	t	T
07	0402	1005	2.0±0.1	4.0±0.1	0.6±0.1	1.1±0.1	2.0±0.1	0.20±0.05	Max.1
14	0603	1608	4.0±0.1	4.0±0.1	1.1±0.1	1.92±0.1	2.0±0.1	0.20±0.05	Max.0.85
15	0805	2012	4.0±0.1	4.0±0.1	1.6±0.1	2.4±0.1	2.0±0.1	0.20±0.05	Max.1.3
39	1008	2520	4.0±0.1	4.0±0.1	2.35±0.1	2.8±0.1	2.0±0.1	0.22±0.05	Max.1.45
18	1206	3216	4.0±0.1	4.0±0.1	1.9±0.1	3.5±0.1	2.0±0.1	0.20±0.05	Max.1.4
41	1210	3225	4.0±0.1	4.0±0.1	2.68±0.1	3.46±0.1	2.0±0.1	0.23±0.05	Max.1.84
43A	1812	4532	4.0±0.1	4.0±0.1	2.35±0.1	7.4±0.1	2.0±0.1	0.25±0.05	Max.4.5
43/44	1812	4532	8.0±0.1	4.0±0.1	4.18±0.1	4.95±0.1	2.0±0.1	0.24±0.05	Max.1.95

Dimensions are typical – see EIA 481 for detail information.

1. 1. Quantities per Reel According to component size

JTI Size Code	07	14	15	39	18	41	43A	43/44
Size EIA	0402	0603	0805	1008	1206	1210	1812	1812
Size Metric	1005	1608	2012	2520	3216	3225	4532	4532
Quantity/reel	10,000pcs	4,000pcs	4,000pcs	3,000pcs	3,000pcs	2,000pcs	500pcs	2,000pcs
Tape material	paper	paper	Plastic (Embossed)	Plastic (Embossed)	Plastic (Embossed)	Plastic (Embossed)	Plastic (Embossed)	Plastic (Embossed)

2. Reel Dimensions (Units: mm)

3. Taping Specifications

1. 1. For case sizes EIA 0603 and smaller, paper tape is used. For case sizes EIA 0805 and larger, embossed (plastic) tape is used.

*Non-standard top red mark rotated 180 deg w.r.t. tape may be available on certain components, please consult the factory for availability and MOQs that apply.

1. 1. P/N Codes (last digit) for T&R:

Tape material	Code
Paper Tape standard	T
Embossed Tape standard	E
Paper Tape rotated (non-std)	A
Embossed Tape rotated (non-std)	R

4. Peel-off Force

Peel-off force should be in the range of 0.1 – 0.6 N at a peel--off speed of 300 ±10 mm/min.

5. Storage Conditions

• Temperature: 15 - 35° C and relative humidity (RH): 45 - 75%.
• Non-corrosive environment
• It is recommended that product be used within 18 months of receipt

The following p/n's require vacuum sealed packaging when stored (due to Ag (silver) termination):

**Johanson Technology's P/N's with Solderable Silver (Ag/Pt) Terminations requiring Vacuum Packaging
0433BM15A0001	0868BM15C0001	0892DP15B1850	0892LP07A0136
0896BL14B050	0896BM15B0016	0900BL15A100	0900BL15C050
0915BM15A0001	1200BP44A575	1200LP41B0500	1200LP41C0500
1400BP41A0550	1810BP07B200	1900HP41B0500	1900HP41C0500
2025LP15A1225	1905BP18A0050	2450BM07A0004	2345FB39A0050
2450BL07A0100	2450BM15A0015	2450BM14E0007	2450BM15B0009
2450BP07A0100	2450BP08A0100	2450BP14D0100	2450BP14E0100
2450BP14F0100	2450BP15E0100	2450BP15F0100	2450BP15Q0100
2450BP39D100E	2450BP15V0100	2450BP39D100C	2450FB15A0100
2450BP39F100	2500BP15M400	2500FB16A0400	3350BP39A0500
2595FB16A0100	2600BP14M0200	3500FB39A0050	3600BP14M0600
3600BP15M600	0896FB15A0100	5400BP14A0950	5425BP15A1050
5525BP15B0750	2450BM08B0003	2450DP39K5400	2450DP39L5400
2450BL05A0100	2450FB15L0001	2450BM15B0003	0900PC15A0036
0845BL05A0100	0900FM15D0039	2025LP15B0145	2440AT62A0085
2440AT62B0085	2450BM14A0021	2450BP07C0100	2450BP08B0100
2450BP14G0100	2450BP14H0100	2450BP14J0100	2450FB14B0050
28R0BP44A1000	5235CR45A0180	5697CR45A0360	0900FM15D0039E
5697CR45A0360E	2440AT62A0085E	2450FB15A050E	5235CR45A0180E
4700BP14A0600

Ceramic Resonator Filter Tape & Reel Packaging

Ceramic Resonator Filter Tape & Reel Packaging PDF

Tape Dimensions & Quantity (Units in mm)

Applicable Part Numbers
5697CR45A0031E
5697CR45A0360E
5697BP45A0360E

Applicable Part Numbers
5235CR45A0031E
5235CR45A0180E
5235BP45A0180E

Reel Dimensions (Units in mm)

Peel-off Force

Peel-off force should be in the range of 0.1 - 0.6 N at a peel-off speed of 300±10 mm/min.

Recommended Storage Conditions for unused product on T&R

• Temperature: 15 - 35° C and relative humidity (RH): 45 - 75%
• Non-corrosive environment
• It is recommended that product be used within 18 months of reciept.

Due to silver terminiations, these components require vacuum sealed packaging when stored